Billet Automotive Buttons

28mm 'CUSTOM LASER ETCHING' Design Your Own Billet Push Button Switch

$ 39.95 AUD

28mm design your own laser etched billet buttons

Design your own laser etched button here you can choose custom text or upload a symbol or logo. You can also add custom outer text to bezel for an additional charge. Please make sure you have permission or legal rights if you are uploading a symbol or logo that may be copyright.

Button design tips:

  • For plain text on the center I recommend only 1-2 lines maximium and 7 characters per line on the center of the buttons, I can do more if you like but the letters get very narrow. Etching will be done in upper case bold font only.
  • For uploading a symbol or logo (jpeg, png, bmp, pdf, ai etc) please make sure it is a simple design as the laser can only do black and white images, I can convert colour images to work but they still need to follow the simple design rule if you are unsure please just message me to save you delays.
  • For outer bezel text (additional charge) I use upper case letters but you can leave me a message if you want lower case, I also do bold font on all text but sometimes standard looks better when you want large amounts of text or a more plain look is wanted, I normally choose what looks best but if you want anything specific just leave me a message in cart.

    Made to order laser etched billet buttons are fitted with an LED that can be wired so that it is active when the button is pushed in or when the headlights or ignition are on. All the 28mm billet buttons have an IP67 water and dust resistant rating. These are suitable for many applications such as cars, marine and motor homes etc. *I recommend running a relay with these buttons on any high draw accessories as they are rated at 5A.

    Button case material:

    • Black finish: Nickel Plated.
    • Stainless finish: Stainless Steel.

    Button push operation:

    • Latching: Push for on, then push again for off.
    • Momentary: Only active when your finger is held on the button.

    Specifications:

    • Depth inc contacts: 42mm
    • Head diameter: 31.5mm
    • Actual push button diameter: 25mm inc LED
    • Hole size required to fit: 28mm
    • Maximum panel thickness for install: 10mm*
    • Switch rating: 5Amp
    • Led voltage: 12 Volt
    • Degree of Protection: IP67

        Recently viewed