Billet Automotive Buttons

19mm 'CUSTOM LASER ETCHING' Design Your Own Billet Push Button Switch Text Logo Symbol etc

$ 36.95 AUD

19mm design your own laser etched billet buttons with harness plug included

Design your own laser etched button here you can choose custom text or upload a symbol or logo. You can also add custom outer text to the button bezel for an additional charge. Please make sure you have permission or legal rights if you are uploading a symbol or logo that may be copyright.

Button design tips:

  • For plain text on the center I recommend only 1-2 lines maximium and 7 characters per line on the center of the buttons, I can do more if you like but the letters get very narrow. Etching will be done in upper case bold font only.
  • For uploading a symbol or logo (jpeg, png, bmp, pdf, ai etc) please make sure it is a simple design as the laser can only do black and white images, I can convert colour images to work but they still need to follow the simple design rule if you are unsure please just message me to save you delays.
  • For outer bezel text (additional charge) I use upper case letters but you can leave me a message if you want lower case, I also do bold font on all text but sometimes standard looks better when you want large amounts of text or a more plain look is wanted, I normally choose what looks best but if you want anything specific just leave me a message in cart.

    *We now sell a high current 19mm 16A button, please note that the stainless halo and the black halo high current buttons look slightly different then the photos shown. If buying a set of these buttons we recommend sticking to the same amp rating so all switches match.
    Made to order laser etched billet buttons are fitted with an LED that can be wired so that it is active when the button is pushed in or when the headlights or ignition are on. All the 19mm billet buttons have an IP65 water and dust resistant rating and each button comes with a plug in harness for easy wiring. These are suitable for many applications such as cars, marine and motor homes etc.

    Button type:

    • Black backlit: Nickel plated shell, LED back-lit etching. (only the etching on the center of the button is back-lit) 5amp rated SPDT switch
    • Black halo finish: Nickel plated, LED halo. 5amp rated SPDT switch
    • Stainless halo finish: Stainless steel, LED halo. 5amp rated SPDT switch
    • Black backlit 16A: Nickel plated shell, LED back-lit etching. (only the etching on the center of the button is back-lit) 16amp rated SPST switch
    • Black halo finish 16A: Nickel plated, LED halo. 16amp rated SPST switch
    • Stainless halo finish 16A: Stainless steel, LED halo. 16amp rated SPST switch

    Button push operation:

    • Latching: Push for on, then push again for off.
    • Momentary: Only active when your finger is held on the button.


    • Depth of switch inc contacts: 35mm (50mm with harness plug)
    • Face diameter: 22mm
    • Hole size required to fit: 19mm
    • Maximium panel thickness for install: 10mm*
    • Switch rating: 5Amp / 16Amp
    • Led voltage: 12 Volt
    • Degree of Protection: IP65

        Recently viewed